Subaru Crosstrek Service Manual: Installation
WHEEL AND TIRE SYSTEM > Tire and Wheel
INSTALLATION
1. Install the wheels to vehicle.
2. Tighten the wheel nuts to the specified torque.
Tightening torque:
Except for C4 model: 120 N·m (12.24 kgf-m, 88.5 ft-lb)
C4 model: 100 N·m (10.2 kgf-m, 73.8 ft-lb)
Removal
WHEEL AND TIRE SYSTEM > Tire and WheelREMOVAL1. Lift up the vehicle.2. Remove the wheel nut.3. Remove the wheels.CAUTION:When removing the wheels, be careful not to damage the bolt - hub. ...
Other materials:
Removal
SECURITY AND LOCKS > Rear Lock ButtonREMOVALNOTE:The rear lock button is integrated into the rear gate opener button.1. Disconnect the ground cable from battery. NOTE">2. Remove the garnish assembly - rear gate. Rear Gate Garnish > REMOVAL">3. Remove the screws and remove the ...
Dtc p0717 input/turbine shaft speed sensor "a" circuit no signal
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0717 INPUT/TURBINE SHAFT SPEED SENSOR "A" CIRCUIT NO SIGNALDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Standing start problems• Shock ...
Replacement
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Differential Gear OilREPLACEMENTCAUTION:• Immediately after the vehicle has been running or after idling for a long time, the differential gear oil will be hot. Be careful not to burn yourself.• Be careful not to spill differential gear oil ...
