Subaru Crosstrek Service Manual: Installation
STARTING/CHARGING SYSTEMS(H4DO) > Starter
INSTALLATION
Install in the reverse order of removal.
NOTE:
• For CVT model, a nut is used at (a).
• Tighten the starter and cable stay (b) together using the upper bolt securing the starter.
Tightening torque:
T1: 14 N·m (1.4 kgf-m, 10.3 ft-lb)
T2: 50 N·m (5.1 kgf-m, 36.9 ft-lb)
Tightening torque:
10 N·m (1.0 kgf-m, 7.4 ft-lb)
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
Inspection
STARTING/CHARGING SYSTEMS(H4DO) > StarterINSPECTIONNOTE:• After the inspection, reinstall the disassembled or removed parts during the inspection in the reverse order of disassembly/removal p ...
Other materials:
Dtc b1860 short in driver s knee airbag
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1860 SHORT IN DRIVER’S KNEE AIRBAGDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Airbag main harness circuit is shorted.• Knee airbag module harness circuit is shorted.&bul ...
Dtc b14e5 mode door actuator stepping motor circuit open
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B14E5 MODE DOOR ACTUATOR STEPPING MOTOR CIRCUIT OPENDTC detecting condition:Mode door actuator stepping motor circuit is open.Trouble symptom:Vent does not change.Wiring diagram:Air conditioning syst ...
Dtc b1407 met communication
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1407 MET COMMUNICATIONDTC DETECTING CONDITION:Communication failure between body integrated unit and combination meterCAUTION:When the combination meter is replaced, registration of the immobilizer system is r ...
