STARTING/CHARGING SYSTEMS(H4DO) > Battery Current & Temperature Sensor
INSTALLATION
1. BATTERY CURRENT SENSOR
Install in the reverse order of removal.
Tightening torque:
General Description > COMPONENT">
3 N·m (0.3 kgf-m, 2.2 ft-lb)
2. BATTERY TEMPERATURE SENSOR
Install in the reverse order of removal.
Suspension Inspection
PERIODIC MAINTENANCE SERVICES > SuspensionINSPECTION1. FRONT SUSPENSION BALL JOINT1. Lift up the vehicle until front wheels are off ground.2. Grasp the bottom of tire and move it in and out in axial direction. If movement (B) is observed between the brake disc cover (A) and end of front arm (D), ...
To hook the top tether
CAUTION
Except for the center seating
position, remove the head restraint
when mounting a child
restraint system. Otherwise, it
might be possible that the top
tether cannot be fastened tightly.
For the center seating position,
raise the center head restraint to
the extended posit ...
Checking the oil level
1. Park the vehicle on a level surface and
turn the ignition switch to the "LOCK"/
"OFF" position. If you check the oil level
just after turning the ignition switch to the
"LOCK"/"OFF" position, wait a few minutes
for the oil to drain back into the oil pan
before checking the level.
Oi ...