SECURITY AND LOCKS > Remote Openers
INSTALLATION
1. Before installation, check the following items.
• Cable is free from deformation such as fray.
2. Install each part in the reverse order of removal.
Tightening torque:
Front hood lock: General Description > COMPONENT">
Remote opener: General Description > COMPONENT">
Assembly
EXHAUST(H4DO) > Front Exhaust PipeASSEMBLY1. Install each cover to the front exhaust pipe.Tightening torque:13 N·m (1.3 kgf-m, 9.6 ft-lb)(A)Front exhaust pipe upper cover(E)Front catalytic converter lower cover LH(H)Front exhaust pipe side cover LH (rear)(B)Front catalytic converter upper ...
Adjustment
FRONT SUSPENSION > Wheel AlignmentADJUSTMENTCAUTION:When the wheel alignment has been adjusted, perform the adjustment of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT">1. FRONT CAMBER1. Adjust the camber angle to the following value.Tire sizeCamb ...
Removal
EXTERIOR/INTERIOR TRIM > Roof RailREMOVAL1. Remove the trim panel - roof. Roof Trim > REMOVAL">2. Remove the curtain airbag module. Curtain Airbag Module > REMOVAL">CAUTION:• Before handling the airbag system components, refer to “CAUTION” of “Gener ...