Subaru Crosstrek Service Manual: Installation
SECURITY AND LOCKS > Impact Sensor
INSTALLATION
1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.
2. Close all the doors and rear gate.
3. Press the UNLOCK button of the keyless transmitter or access key.
4. Disconnect the ground cable from battery. NOTE">
5. Install the impact sensor.
6. Change the setting of impact sensor using Subaru Select Monitor.
Removal
SECURITY AND LOCKS > Impact SensorREMOVAL1. Pull out the key from the ignition switch, or turn off the power.2. Close all the doors and rear gate.3. Press the UNLOCK button of the keyless transmitt ...
Operation
SECURITY AND LOCKS > Impact SensorOPERATION1. IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR1. Make an impact sensor setting.(1) Connect the Subaru Select Monitor.NOTE:For detailed operation pro ...
Other materials:
Dtc c2423 transmitter 3 battery voltage low
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2423 TRANSMITTER 3 BATTERY VOLTAGE LOWNOTE:Refer to DTC C2424 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2424 TRANSMITTER 4 BATTERY VOLTAGE ...
Power window operation by passengers
Passenger's side power window switches
Each passenger window can be controlled
by the power window switch located on
the door.
Operating the windows
To open:
Press the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it u ...
Repair
GLASS/WINDOWS/MIRRORS > Rear Window Defogger SystemREPAIR1. Clean the broken portion with alcohol or appropriate cleaning solvent.2. Mask both side of wire with masking tape.3. Apply the conductive silver composition to the broken portion.Preparation items:Conductive silver composition: Permatex ...
