Subaru Crosstrek Service Manual: Installation
SECURITY AND LOCKS > Front Hood Lock Assembly
INSTALLATION
1. Before installation, check the following items.
• Is the cable deformed?
• Grease is applied sufficiently to cable joints.
If grease is insufficient, add it as necessary before assembling the cable.
2. Install each part in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Description”. General Description > COMPONENT">
Inspection
SECURITY AND LOCKS > Front Hood Lock AssemblyINSPECTIONCheck if the lock assembly operates normally.If lever deformation, abnormal wear, or unsmooth lock operation is observed, replace the lock ass ...
Other materials:
Dtc c0071 steer angle sensor op
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0071 STEER ANGLE SENSOR OPDTC detecting condition:Steering angle sensor output is faulty.Trouble symptom:• VDC does not operate.• EyeSight does not operate.Wiring diagram:Vehicle ...
General diagnostic table Inspection
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > General Diagnostic TableINSPECTIONSymptomsMain probable causeOther probable causePoor brake performanceLong braking/stopping distance• VDCCM&H/U• Brake pad• Aeration to brake line• Tire specifications, tire wear and air pr ...
Intake manifold vacuum Inspection
MECHANICAL(H4DO) > Intake Manifold VacuumINSPECTION1. Turn the ignition switch to OFF.2. Warm up the engine.3. Install the vacuum gauge.(1) Remove the brake booster vacuum hose from the intake manifold.(2) Connect the vacuum gauge to the intake manifold.4. Keep the engine at idle speed and read t ...
