PARKING BRAKE > Parking Brake Cable
INSTALLATION
1. Install each part in the reverse order of removal.
Tightening torque:
Cable clamp: 18 N·m (1.84 kgf-m, 13.3 ft-lb)
Rear wheel: Except for C4 model
120 N·m (12.24 kgf-m, 88.5 ft-lb)
Rear wheel: C4 model
100 N·m (10.20 kgf-m, 73.8 ft-lb)
NOTE:
• Apply grease to the cable guide inside the tunnel, and pass the cable through.
• After installing the backrest assembly, make sure that each seat belt operates normally.
• Make sure that they are properly secured on each hook on the vehicle side.
2. Be sure to adjust the lever stroke. Parking Brake Lever > ADJUSTMENT">
Dtc b2788 ign signal correlation (steering lock cm)
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2788 IGN SIGNAL CORRELATION (STEERING LOCK CM)DTC detecting condition:When mismatch occurs in the IG1 input of the steering lock CM for both LIN communication line input (IG1 i ...
Component
ENTERTAINMENT > General DescriptionCOMPONENT1. DATA COMMUNICATION MODULE(1)Cap screw(4)Backup batteryTightening torque: N·m (kgf-m, ft-lb)(2)Backup battery cover(5)Data communication moduleT:0.3 (0.03, 0.2)(3)Circlip ...
Inspection
SEATS > Seat Heater SystemINSPECTION1. WIRING DIAGRAMRefer to “Seat Heater System” in the wiring diagram. Seat Heater System > WIRING DIAGRAM">2. DIAGNOSTIC CHARTSymptomsRepair orderSeat heater does not operate.1. Check the fuse. Seat Heater System > INSPECTION"&g ...