Subaru Crosstrek Service Manual: Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Drive Gear
INSTALLATION
1. Install the transfer drive gear.
Tightening torque:
26 N·m (2.7 kgf-m, 19.2 ft-lb)
2. Select the adjusting washer. Transfer Case and Extension Case Assembly > INSTALLATION">
3. Install the transfer driven gear.
4. Install the transfer case and the extension case assembly. Transfer Case and Extension Case Assembly > INSTALLATION">
5. Install the back-up light switch and the neutral position switch. Switches and Harness > INSTALLATION">
6. Install the manual transmission assembly to the vehicle. Manual Transmission Assembly > INSTALLATION">
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Drive GearINSPECTION1. Ball bearingReplace the bearings in the following cases.• In case of broken or rusty bearings• In case of wor ...
Other materials:
Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Driven GearASSEMBLY1. Using the ST, install the taper roller bearing (transfer case side).CAUTION:Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).NOTE:Be careful when handling, because the outer race and inner race of th ...
Removal
AIRBAG SYSTEM > Driver’s Airbag ModuleREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Position the front wheels straight ahead.2. Tu ...
Disassembly
COOLING(H4DO) > Radiator Sub Fan and Fan MotorDISASSEMBLY1. Remove the clip which holds the sub fan motor connector onto the radiator sub fan shroud.2. Disconnect the radiator sub fan from the sub fan motor.3. Disconnect the sub fan motor from the radiator sub fan shroud. ...
