Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Installation

MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Idler Gear

INSTALLATION

1. Install the reverse shifter lever, adjusting washer, reverse idler gear, reverse idler gear shaft and washer, and secure them with the straight pin.

NOTE:

Be sure to install the reverse idler gear shaft from rear side.

Use a new straight pin.

(A)

Straight pin

(B)

Reverse idler gear shaft

(C)

Reverse idler gear

(D)

Adjusting washer

(E)

Reverse idler gear washer

(F)

Reverse shifter lever

2. Check and adjust clearance between the reverse idler gear and the timing case wall surface. Reverse Idler Gear > INSTALLATION"> Reverse Idler Gear > ADJUSTMENT">

3. Install the shifter forks and rods. Shifter Fork and Rod > INSTALLATION">

4. Install the front differential assembly. Front Differential Assembly > INSTALLATION">

5. Install the main shaft assembly. Main Shaft Assembly > INSTALLATION">

6. Install the drive pinion shaft assembly. Drive Pinion Shaft Assembly > INSTALLATION">

7. Install the transmission case. Transmission Case > INSTALLATION">

8. Install the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > INSTALLATION">

9. Install the back-up light switch and the neutral position switch. Switches and Harness > INSTALLATION">

10. Install the manual transmission assembly to the vehicle. Manual Transmission Assembly > INSTALLATION">

Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Idler GearINSPECTION1. Move the reverse shifter rod toward the reverse side. Check the clearance between the reverse idler gear and the transmiss ...

Shifter fork and rod
...

Other materials:

Dtc u0402 invalid data received from tcm
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0402 INVALID DATA RECEIVED FROM TCMThis is detected when CAN data from TCM is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...

Combination meter system Wiring diagram
WIRING SYSTEM > Combination Meter SystemWIRING DIAGRAM1. MODEL WITH NORMAL METER2. MODEL WITH COLOR TFT METER ...

Tire pressure monitoring system (TPMS) (U.S.-spec. models)
Low tire pressure warning light (type A) Low tire pressure warning light (type B) The tire pressure monitoring system provides the driver with the warning message indicated by sending a signal from a sensor that is installed in each wheel when tire pressure is severely low. The tire ...

© 2016-2024 Copyright www.sucross.com