Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Installation

MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check Sleeve

INSTALLATION

1. Install the reverse check sleeve.

Tightening torque:

6.4 N·m (0.7 kgf-m, 4.7 ft-lb)

2. Install the reverse check ball, reverse accent spring, gasket and plug.

NOTE:

Use a new gasket.

Tightening torque:

9.75 N·m (1.0 kgf-m, 7.2 ft-lb)

3. Install the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > INSTALLATION">

4. Install the manual transmission assembly to the vehicle. Manual Transmission Assembly > INSTALLATION">

Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check SleeveINSPECTION• Make sure the cutout of the reverse accent shaft is aligned with the opening in the reverse check sleeve.• Tu ...

Reverse idler gear
...

Other materials:

Dtc b28af stereo camera adjustment incomplete
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28AF STEREO CAMERA ADJUSTMENT INCOMPLETEDetected when adjustment or inspection of stereo camera has not been completed normally.DTC DETECTING CONDITION:• Operation is aborted during adjustment or inspection ...

Operation
EyeSight (DIAGNOSTICS) > EyeSight Temporary Code(s) DisplayOPERATIONIf the EyeSight pause code is detected from the stereo camera, all the functions of the EyeSight excluding the conventional cruise control stop temporarily and cannot be used. When the failure is resolved, the function starts ope ...

Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Expansion ValveINSTALLATIONCAUTION:Replace the O-rings with new parts, and then apply compressor oil.1. Install each part in the reverse order of removal.Tightening torque:Heater and cooling unit: General Description > COMPONENT">Air conditio ...

© 2016-2024 Copyright www.sucross.com