Subaru Crosstrek Service Manual: Installation

1. Install the differential side retainers using ST.

2. Install the taper roller bearing outer race to the transmission case.

3. Install the front differential assembly.

NOTE:

Be careful not to bend the seal lips of oil seal.

4. Install the main shaft assembly. Main Shaft Assembly > INSTALLATION">

5. Install the drive pinion shaft assembly. Drive Pinion Shaft Assembly > INSTALLATION">

6. Install the transmission case. Transmission Case > INSTALLATION">

7. Install the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > INSTALLATION">

8. Install the manual transmission assembly to the vehicle. Manual Transmission Assembly > INSTALLATION">

Inspection

General description

Other materials:

Most common causes of corrosion
The most common causes of corrosion are: The accumulation of moisture retaining dirt and debris in body panel sections, cavities, and other areas. Damage to paint and other protective coatings caused by gravel and stone chips or minor accidents. Corrosion is accelerated on the vehic ...

Dtc c1312 fr pressure reducing valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1312 FR PRESSURE REDUCING VALVENOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C ...

Engine oil
For the checking, adding and replacing procedure or other details, refer to "Engine oil" F11-8. NOTE The procedure for changing the engine oil and oil filter should be performed by a properly-trained expert. It is recommended that you have this service performed by your SUBARU dealer. Approv ...