LIGHTING SYSTEM > Side Turn Signal Light Assembly
INSTALLATION
Install each part in the reverse order of removal.
Dtc p0801 reverse inhibit control circuit/open
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0801 REVERSE INHIBIT CONTROL CIRCUIT/OPENDTC DETECTING CONDITION:Immediately at fault recognitionNOTE:For diagnostic procedures, refer to “BODY CONTROL SYSTEM (DIAGNOSTICS)”. ...
Connecting a Bluetooth device
To use the Bluetooth audio system, it is
necessary to register a Bluetooth device
with the system.
Registering an additional device
1. Select the "Add" key on the Bluetooth
devices connection screen.
2. For more information: Refer to "Registering/
connecting Bluetoothdevice" F5-
65.
Se ...
Removal
LIGHTING SYSTEM > Luggage Room LightREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - luggage room.CAUTION:When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.(1) Release the claws and remove the main ...