LIGHTING SYSTEM > Headlight Assembly
INSTALLATION
CAUTION:
Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).
1. Install each part in the reverse order of removal.
Tightening torque:
Light assembly - head: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
2. Secure the flange section of the bumper face - front to the bracket - front bumper side.
3. Adjust the headlight beam and fog light beam.
• Adjust the headlight beam. Headlight Assembly > ADJUSTMENT">
• Adjust the fog light beam. Front Fog Light Assembly > ADJUSTMENT">
Headlights (models without HID headlights)
CAUTION
Halogen headlight bulbs become
very hot while in use. If you touch
the bulb surface with bare hands or
greasy gloves, fingerprints or
grease on the bulb surface will
develop into hot spots, causing the
bulb to break. If there are finger
prints or grease on the bulb surface,
wipe the ...
List
AIRBAG SYSTEM (DIAGNOSTICS) > Read Current DataLISTItemDisplayNoteTrip Count — — Count — — Time Count [msec] — — Belt Buckle Switch RHUnbelted/Belted“Belted” when passenger’s seat belt is fastened“Unbelted” when passenger’s seat belt is not faste ...
Inspection
PERIODIC MAINTENANCE SERVICES > Front & Rear Differential Gear OilINSPECTION1. FRONT DIFFERENTIAL (MT MODEL)Front differential gear oil of MT model lubricates the transmission and differential together. Refer to “Transmission Gear Oil” for inspection procedures. Transmission Gear ...