Subaru Crosstrek Service Manual: Installation
LIGHTING SYSTEM > Front Fog Light Assembly
INSTALLATION
CAUTION:
Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).
1. Install each part in the reverse order of removal.
Tightening torque:
Fog light assembly - front: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
2. Adjust the fog light beam. Front Fog Light Assembly > ADJUSTMENT">
Removal
LIGHTING SYSTEM > Front Fog Light AssemblyREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle.3. Remove the screw and clips, and turn over the front side of th ...
Other materials:
BT Devices Connection screen
1. Press the HOME button.
2. Touch the "SETTINGS" key and then
touch the tab.
3. Touch the "BT Devices Connection"
key and then select the desired device to
register.
"BT Devices Connection" screen (One device is registered.)
Register the device. Refer to "Registering/
connecting ...
How to use keyless access functions
Keyless access function tips
Turn off the push-button ignition switch
before locking the doors (including rear
gate) using the keyless access function. It
is not possible to lock the doors (including
the rear gate) using the keyless access
function when the push-button ignition
switc ...
Dtc c1322 fl pressure reducing valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1322 FL PRESSURE REDUCING VALVENOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C ...
