Subaru Crosstrek Service Manual: Installation
LIGHTING SYSTEM > Back-up Light Bulb
INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
Light assembly - rear combination: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
Removal
LIGHTING SYSTEM > Back-up Light BulbREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to da ...
Other materials:
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Inhibitor SwitchINSPECTIONWhen the driving condition or starter motor operation is improper, first check the shift linkage for improper operation. If the shift linkage is functioning properly, check the inhibitor switch.1. Remove the clip (A) from the a ...
Wheel replacement
When replacing wheels due, for example,
to damage, make sure the replacement
wheels match the specifications of the
wheels that are fitted as standard equipment.
Replacement wheels are available
from SUBARU dealers.
WARNING
Use only those wheels that are
specified for your vehicle. Wheels
...
Type B
Temperature control dial (Refer to "Automatic
climate control operation (type B, C
and D)" F4-7 and/or "Temperature control"
Air conditioner button (Refer to "Air
conditioner control"
Fan speed control dial (Refer to "Automatic
climate control operation (type B, C
and D)" F4-7 a ...
