Subaru Crosstrek Service Manual: Installation

CAUTION:

• Make sure the electrical connector is connected securely.

• Make sure that the multi-function display (MFD) operates normally.

• After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.

• When the multi-function display has been replaced, perform the following operations.

– Be sure to reset the ODO fuel economy value of the multi-function display (MFD). (High grade type) Multi-function Display (MFD) System > OPERATION">

– Be sure to correction the lifetime fuel economy value of the multi-function display (MFD). (High grade type) Multi-function Display (MFD) System > OPERATION">

Removal

Multi-function display (mfd) system

Other materials:

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer ClutchINSPECTION• Inspect the drive plate facing for wear and damage.• Driven plate for discoloration (burned color)• Make sure the snap ring is not worn and the return spring has no permanent distortion, damage, or deformatio ...

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CompressorREMOVAL1. CROSSTREK MODEL1. Perform compressor oil return operation. Compressor Oil > PROCEDURE">2. Turn the A/C switch to OFF, and turn the ignition switch to OFF.3. Using the refrigerant recovery system, discharge refrigerant. Re ...

Installation
LIGHTING SYSTEM > Headlight AssemblyINSTALLATIONCAUTION:Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).1. Install each part in the reverse order of removal.Tightening t ...