Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve Actuator

INSTALLATION

Install in the reverse order of removal.

NOTE:

Use a new gasket.

Tightening torque:

6 N·m (0.6 kgf-m, 4.4 ft-lb)

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve ActuatorREMOVAL1. Disconnect the ground cable from battery.2. Disconnect the connector (A) from tumble generator valve assembly, and rem ...

Tumble generator valve assembly
...

Other materials:

Dtc b1650 occupant detection system malfunction
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1650 OCCUPANT DETECTION SYSTEM MALFUNCTIONNOTE:Refer to “Occupant Detection System” for details on DTC B1650. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1650 OCCUPANT DETECTION SYSTEM MALFUNCT ...

Removal
CONTROL SYSTEMS > MT Gear Shift LeverREMOVAL1. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.2. Remove the console box. Console Box > REMOVAL">3. Remove the gear shift knob and remove the ...

Map light
Type A 1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to remove it. 3. Install a new bulb. 4. Reinstall the lens. Type B 1. Remove the lens ...

© 2016-2024 Copyright www.sucross.com