Subaru Crosstrek Service Manual: Installation

Subaru Crosstrek Service Manual / Fuel injection (fuel systems)(h4do) / Electronic throttle control relay / Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Electronic Throttle Control Relay

INSTALLATION

Install in the reverse order of removal.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

Removal

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Electronic Throttle Control RelayREMOVAL1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.2. Release the lock a ...

Engine control module (ecm)

...

Other materials:

Rear window wiper and washer switch
Washer (accompanied by wiper operation) Continuous Intermittent Off Washer (accompanied by wiper operation) ...

Dtc p0016 crankshaft position - camshaft position correlation bank 1 sensor a
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0016 CRANKSHAFT POSITION - CAMSHAFT POSITION CORRELATION BANK 1 SENSOR ADTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Engine stall• Improp ...

Removal
AIRBAG SYSTEM > Passenger’s Airbag ModuleREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Turn the ignition switch to OFF.2. Disconne ...