FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Camshaft Position Sensor
INSTALLATION
Install in the reverse order of removal.
NOTE:
• Use new O-rings.
• Apply engine oil to O-ring.
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
Inspection
ENGINE (DIAGNOSTICS)(H4DO) > General DescriptionINSPECTIONBefore performing diagnostics, check the following item which might affect engine problems.1. BATTERY1. Check the battery. Battery > INSPECTION">2. Check the condition of the main and other fuses, and harnesses and connectors. ...
Installation
EXTERIOR BODY PANELS > Rear Sealing CoverINSTALLATIONCAUTION:• If the sealing cover - rear door gets broken, replace it with a new part.• Apply a butyl tape evenly.• Attach the sealing cover - rear door, keeping it from becoming wrinkled.• If the butyl tape is applied unev ...
Installation
SEAT BELT SYSTEM > Front Seat BeltINSTALLATION1. SEAT BELT OUTER - FRONTCAUTION:• The parts of the driver and passenger sides are not the same. Before installation, make sure that the correct part is used.• During installation, make sure that the seat belts are not twisted.• Aft ...