Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Installation

EXTERIOR/INTERIOR TRIM > Front Bumper

INSTALLATION

1. Install each part in the reverse order of removal.

2. Secure the flange section of the bumper face - front to the bracket - front bumper side.

CAUTION:

Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).

Before installing the bumper face, match the claws on the bracket - front bumper with the engaging position of flange section on the bumper face side. If the engaging position is not correct, the flange section may be broken or the clearance between fender panel and bumper face may not be uniform.

Tightening torque:

Front bumper-related parts: General Description > COMPONENT">

Under cover - front: 18 N·m (1.84 kgf-m, 13.3 ft-lb)

3. Install each part in the reverse order of removal.

4. Adjust the headlight beam and fog light beam.

Adjust the headlight beam. Headlight Assembly > ADJUSTMENT">

Adjust the fog light beam. (Model with fog light) Front Fog Light Assembly > ADJUSTMENT">

Front bumper
...

Repair
EXTERIOR/INTERIOR TRIM > Front BumperREPAIR1. COATING METHOD FOR PP BUMPERProcess No.Process nameJob contents1Bumper installationPlace the bumper on a paint worktable as required. Use the paint wor ...

Other materials:

Access key - if access key does not operate properly
CAUTION Keep metallic objects, magnetic sources and signal transmitters away from the area between the access key and the push-button ignition switch. They may interfere with the communication between the access key and the push-button ignition switch. The following functions may be inopera ...

Installation
WIPER AND WASHER SYSTEMS > Front Wiper ArmINSTALLATION1. MODELS WITHOUT EyeSight1. Install the arm assembly - windshield wiper.(1) Assemble the arm assembly - windshield wiper so that the blade assembly - windshield wiper is aligned to the ceramic print point mark of the windshield glass.(2) Tigh ...

Assembly
SEATS > Rear SeatASSEMBLYCAUTION:• Do not reuse hog rings.• Secure the hog ring using hog ring pliers.• Install the hog rings to the specified points securely and make sure that there is no wrinkle or twisting on the cover COMPL - rear backrest.1. Assemble the cover COMPL - rear ...

© 2016-2024 Copyright www.sucross.com