Subaru Crosstrek Service Manual: Installation

Subaru Crosstrek Service Manual / Exterior/interior trim / Console box / Installation

EXTERIOR/INTERIOR TRIM > Console Box

INSTALLATION

Install each part in the reverse order of removal.

Tightening torque:

6.5 N·m (0.66 kgf-m, 4.8 ft-lb)

Removal

EXTERIOR/INTERIOR TRIM > Console BoxREMOVAL1. Disconnect the ground cable from battery. NOTE">NOTE:On CVT models, shift the select lever into “N” before disconnecting the batte ...

Other materials:

Note
LIGHTING SYSTEM > Interior Light SystemNOTEFor operation procedures of each component of the interior light system, refer to the respective section.• Spot map light: Spot Map Light">• Room light: Room Light">• Luggage room light: Luggage Room Light">&b ...

Removal
DRIVE SHAFT SYSTEM > Propeller ShaftREMOVALCAUTION:• Before removing propeller shaft, wrap metal parts with a cloth or rubber material.• Do not disassemble the center EDJ of the propeller shaft.• Before removing propeller shaft, wrap the metal parts attached to the rubber boot o ...

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorREMOVAL1. Disconnect the ground cable from battery. Battery > REMOVAL">2. Remove the ambient sensor.(1) Disconnect the connector.(2) Release the claws, and then remove the ambient sensor from the bracket. ...