Subaru Crosstrek Service Manual: Installation

CAUTION:

The hood COMPL - front is heavy. When removing or installing the hinge COMPL - front hood, be sure to work in a group of two or more.

1. To install the insulator - front hood and the seal - front duct, follow the removal procedure in the reverse order.

2. Align the alignment marks (A), and install the striker - front hood to the hood COMPL - front.

CAUTION:

When installing the striker - front hood, make sure that the front and rear sides are positioned in a correct direction.

Tightening torque:

33 N·m (3.36 kgf-m, 24.3 ft-lb)

It is not necessary to adjust the striker - front hood because there is no span of adjustable range.

3. Install the hinge COMPL - front hood to the vehicle body. (When the hinge COMPL - front hood is removed)

4. Temporarily install the hood COMPL - front to the hinge COMPL - front hood.

NOTE:

When installing the hood COMPL - front, make sure that a uniform clearance is created around it.

5. Adjust the clearance around the hood COMPL - front. Front Hood > ADJUSTMENT">

6. Tighten the bolts and nuts of the hinge COMPL - front hood.

Tightening torque:

25 N·m (2.55 kgf-m, 18.4 ft-lb)

7. Install each part of the hood COMPL - front in the reverse order of removal.

• Insulator - front hood

• Seal - front duct

Removal

Front sealing cover

Other materials:

Dtc p0516 battery temperature sensor circuit low
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0516 BATTERY TEMPERATURE SENSOR CIRCUIT LOWDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATIO ...

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Drive GearREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the air breather hose. Air Breather Hose > REMOVAL">3. Remove the control valve body. Control ...

If you park your vehicle in case of an emergency
Models with multi function display Models without multi function display The hazard warning flasher should be used in day or night to warn other drivers when you have to park your vehicle under emergency conditions. Avoid stopping on the road. It is best to safely pull off the roa ...