EXHAUST(H4DO) > Muffler
INSTALLATION
Install in the reverse order of removal.
NOTE:
• Use a new gasket and self-locking nut.
• After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.
Tightening torque:
10 N·m (1.0 kgf-m, 7.4 ft-lb)
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Parking PawlINSTALLATION1. Set the range select lever to the “N” range.2. Install the parking pawl shaft, return spring and parking pawl.NOTE:Make sure that the end of return spring sticks out of parking pawl as shown in (a). Make sure that ...
Replacing bulbs
WARNING
Bulbs may become very hot while
illuminated. Before replacing bulbs,
turn off the lights and wait until the
bulbs cool down. Otherwise, there is
a risk of sustaining a burn injury.
CAUTION
Replace any bulb only with a new
bulb of the specified wattage.
Using a bulb of differe ...
Aluminum wheels
Aluminum wheels can be scratched and
damaged easily. Handle them carefully to
maintain their appearance, performance,
and safety.
When any of the wheels are removed
and replaced for tire rotation or to change
a flat tire, always check the tightness of
the wheel nuts after driving approx ...