EXHAUST(H4DO) > Center Exhaust Pipe
INSTALLATION
1. Install the center exhaust pipe upper cover to the center exhaust pipe.
Tightening torque:
13 N·m (1.3 kgf-m, 9.6 ft-lb)
2. Temporarily tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.
NOTE:
Use a new gasket.
3. Install the bolts, springs, and nuts which secure the rear exhaust pipe to the center exhaust pipe.
NOTE:
Use a new gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
4. Tighten the bolts which secure the center exhaust pipe to the hanger bracket.
Tightening torque:
35 N·m (3.6 kgf-m, 25.8 ft-lb)
5. Tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.
Tightening torque:
42.5 N·m (4.3 kgf-m, 31.3 ft-lb)
Removal
SECURITY AND LOCKS > Accessory Relay (Push Button Start)REMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground cable from b ...
Dtc u0140 lost communication with body control module
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULENOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedures. Basic Diagnostic Procedure">1. OUTLINE OF DIAGNOS ...
Displaying the Radio ID
Each SiriusXM tuner is identified with a
unique radio ID. The "Radio ID" is required
when activating an SiriusXM Satellite
Services or when reporting a problem.
If "Ch 000" is selected using the
AUDIO/TUNE knob, the ID code will be
displayed.
Touch the key. The
Radio ID will be ...