Subaru Crosstrek Service Manual: Installation

1. DATA COMMUNICATION MODULE

CAUTION:

• After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.

• Before handling the airbag system components, always refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”.

1. Install each part in the reverse order of removal.

NOTE:

Align the positioning pin (a) of the data communication module with the positioning hole of the audio assembly or navigation assembly.

2. Perform the registration if the data communication module is replaced with a new part. Telematics System > OPERATION">

3. Check LED lighting status of overhead console or stereo camera cover assembly. Check List for Interview > CHECK">

• After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.

• Before handling the airbag system components, always refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”.

Tightening torque:

Battery cover: 0.3 N·m (0.03 kgf-m, 0.2 ft-lb)

Removal

Diagnostics with phenomenon

Other materials:

Note
LIGHTING SYSTEM > Back-up Light SystemNOTEFor operation procedures of each component of the back-up light system, refer to the respective section.• Rear combination light assembly: Rear Combination Light Assembly">• Back-up light bulb: Back-up Light Bulb"> ...

Removal
LIGHTING SYSTEM > Side Turn Signal Light AssemblyREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - side turn mirror. Outer Mirror Assembly > DISASSEMBLY"> ...

Caution
GLASS/WINDOWS/MIRRORS > General DescriptionCAUTION• Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before disconnecting t ...