Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter Case

INSTALLATION

1. Install the oil pump. Oil Pump > INSTALLATION">

2. Install the oil pump chain cover. Oil Pump Chain > INSTALLATION">

3. Install the front differential assembly. Front Differential Assembly > INSTALLATION">

4. Install the drive pinion shaft assembly. Drive Pinion Shaft Assembly > INSTALLATION">

5. Install the forward clutch assembly. Forward Clutch Assembly > INSTALLATION">

6. Install the reverse brake assembly. Reverse Brake Assembly > INSTALLATION">

7. Install the primary pulley, secondary pulley and variator chain. Primary Pulley and Secondary Pulley > INSTALLATION">

8. Install the reduction drive gear. Reduction Drive Gear > INSTALLATION">

9. Install the transmission case. Transmission Case > INSTALLATION">

10. Install the transmission control device. Transmission Control Device > INSTALLATION">

11. Install the oil strainer and oil pan. Oil Pan and Strainer > INSTALLATION">

12. Install the reduction driven gear assembly. Reduction Driven Gear > INSTALLATION">

13. Install the transfer driven gear assembly. Transfer Driven Gear > INSTALLATION">

14. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION">

15. Install the parking pawl. Parking Pawl > INSTALLATION">

16. Install the extension case. Extension Case > INSTALLATION">

17. Install the inhibitor switch. Inhibitor Switch > INSTALLATION">

18. Install the secondary speed sensor. Secondary Speed Sensor > INSTALLATION">

19. Install the primary speed sensor. Primary Speed Sensor > INSTALLATION">

20. Install the turbine speed sensor. Turbine Speed Sensor > INSTALLATION">

21. Install the transmission harness. Transmission Harness > INSTALLATION">

22. Install the control valve body. Control Valve Body > INSTALLATION">

23. Install the air breather hose. Air Breather Hose > INSTALLATION">

24. Install the transmission assembly to the vehicle. Automatic Transmission Assembly > INSTALLATION">

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter CaseINSPECTION• Check for leakage of CVTF from the connection between converter case and transmission case.• Check there is no dama ...

Cvtf
...

Other materials:

Replacement
DIFFERENTIALS > Rear Differential Mount BushingREPLACEMENTCAUTION:• If there was so much rust in the rear differential mount bushing, remove the rust before starting work.• Apply the molybdenum grease on the square thread of the ST (shaft and nut) before use.1. Remove the rear differe ...

Procedure
SECURITY AND LOCKS > Function Setting (Customize)PROCEDURE1. METHOD FOR STOPPING KEYLESS ACCESS SYSTEM FUNCTION BY OPENING/CLOSING DOORS1. Check that the vehicle status is as follows:• Ignition switch OFF• One window is completely open• Keyless access system is activated (or dis ...

SRS airbag system servicing
WARNING When discarding an airbag module or scrapping the entire vehicle damaged by a collision, consult your SUBARU dealer. The SRS airbag has no userserviceable parts. Do not use electrical test equipment on any circuit related to the SRS airbag system. For required servicing o ...

© 2016-2022 Copyright www.sucross.com