BRAKE > Front Disc Rotor
INSTALLATION
NOTE:
Before installation, remove mud and foreign matter from the caliper body assembly.
1. Before installation, check the front disc rotor. Front Disc Rotor > INSPECTION">
2. Install each part in the reverse order of removal.
Tightening torque:
Brake hose bracket: 33 N·m (3.36 kgf-m, 24.3 ft-lb)
Mounting bolt: Refer to “COMPONENT” of “General Description” for the tightening torque. General Description > COMPONENT">
Front wheel: Except for C4 model
120 N·m (12.24 kgf-m, 88.5 ft-lb)
Front wheel: C4 model
100 N·m (10.20 kgf-m, 73.8 ft-lb)
Assembly
CONTROL SYSTEMS > Select LeverASSEMBLY1. Clean all the parts before assembly.2. Apply Multemp D or equivalent to the sliding portion of each part.3. Assemble in the reverse order of disassembly.NOTE:Insert the solenoid unit terminals to the harness connector.(A)Solenoid unit (color code: blue)(B) ...
Wiring diagram
SECURITY AND LOCKS > Keyless Access SystemWIRING DIAGRAMFor wiring diagrams related to the keyless access system, refer to the following items.• Keyless access system: Keyless Access System > WIRING DIAGRAM">• Push button start system: Push Button Start System > WIRING ...
Top display setting
1. Perform the preparation steps according
to "Preparation for screen settings"
2. Operate the "
"
or "
" switch to
select the "Top Display" item. Then push
the
button.
3. Push the
button once more.
4. Select an item by operating the "
" or
"
" switc ...