Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Inspection

AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > General Description

INSPECTION

1. BASIC INSPECTION

Before performing the diagnosis, check the following items which may cause problems relating the wiper or light.

1. Check the battery. Battery">

2. Check the relay and fuse condition. Relay and Fuse">

3. Check the connecting condition of harness and harness connector.

2. FUNCTION CHECK

With the ignition switch ON and the lighting switch set at low beam, change the vehicle posture while the vehicle is stopped. Check that the beam moves, when the vehicle condition is kept for three seconds or more.

Preparation tool
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each fu ...

Read current data
...

Other materials:

Replacement of brake pad and lining
The disc brakes have audible wear indicators on the brake pads. If the brake pads wear close to their service limit, the wear indicator makes a very audible scraping noise when the brake pedal is applied. If you hear this scraping noise each time you apply the brake pedal, have the brak ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Primary Speed SensorINSTALLATIONCAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.Install in the reverse order of removal.NOTE:• Use new O-rings.&bul ...

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Converter CaseREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the air breather hose. Air Breather Hose > REMOVAL">3. Remove the control valve body. Control Valve ...

© 2016-2022 Copyright www.sucross.com