VEHICLE DYNAMICS CONTROL (VDC) > Rear Magnetic Encoder
INSPECTION
Visually check the magnetic encoder parts for any damage. If necessary, replace with a new hub unit COMPL - rear axle.
NOTE:
Because the magnetic encoder is integrated with hub unit COMPL, replace the hub unit COMPL with a new part if there is any defect found on the magnetic encoder.
Power steering
Power steering warning light
Type A
Type B
Power steering system features
The vehicle is equipped with an electric
power steering system. When the ignition
switch is turned to the "ON" position, the
power steering warning light on the
combination meter illuminates to inform
the driver t ...
Installation
REAR SUSPENSION > Rear Shock AbsorberINSTALLATIONCAUTION:• Use a new flange nut.• Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.1. Install each part in the reverse order of removal.Tightening torque:Refer ...
Occupant detection system
The occupant detection system sensor is
installed under the seat upholstery and
monitors the physique and posture of the
front passenger. Using this information,
the occupant detection system determines
whether the front passenger's SRS frontal
airbag should be deployed or not.
If the front ...