VEHICLE DYNAMICS CONTROL (VDC) > Front Magnetic Encoder
INSPECTION
Visually check the magnetic encoder for any damage. If necessary, replace with a new hub unit COMPL - front axle.
NOTE:
Because the magnetic encoder is integrated with hub unit COMPL, replace the hub unit COMPL with a new part if there is any defect found on the magnetic encoder.
Dtc b1500 fuel sender open/short-circuit detection
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1500 FUEL SENDER OPEN/SHORT-CIRCUIT DETECTIONDTC detecting condition:The fuel gauge circuit is open or shorted.Trouble symptom:• Defective fuel gauge.• Fuel level warning light blin ...
By outgoing calls
On the phone (menu) screen, select the
"Outgoing Calls" key to open the "Outgoing
Calls" screen. You can make a call
by selecting an item in the outgoing call
history list.
If there is no outgoing call history, a
message appears to indicate that there
is no outgoing call history data.
...
List
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > System Operation Check ModeLIST• Combination meter (models with normal meters)Check itemItem 1Item 2NoteMeter Needle Movement CheckSpeedometerSpeedometer 0 km/h (MPH) indication — Speedometer 40 km/h (MPH) indication — Speedometer 80 km/h (MPH ...