VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > General Description
INSPECTION
Before performing diagnosis, check the following items which might affect VDC problems.
1. BATTERY
Check the battery. Battery > INSPECTION">
2. GROUND
Check the tightening torque of the ground bolt for VDC.
3. BRAKE FLUID
1. Check the brake fluid level.
2. Check the brake fluid for leaks.
4. HYDRAULIC UNIT
Check the hydraulic unit.
• When using the brake tester VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > INSPECTION">
• When not using the brake tester VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > INSPECTION">
5. BRAKE DRAG
Check for brake drag.
6. BRAKE PAD AND ROTOR
Check the brake pad and rotor.
• Front Front Brake Pad > INSPECTION"> Front Disc Rotor > INSPECTION">
• Rear Rear Brake Pad > INSPECTION"> Rear Disc Rotor > INSPECTION">
7. TIRES
Check the tire specifications, tire wear and air pressure. General Description > SPECIFICATION">
Dtc p0201 cylinder 1 injector "a" circuit
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0201 CYLINDER 1 INJECTOR "A" CIRCUITDTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacin ...
Installing a booster seat
WARNING
Child restraint systems and seatbelts
can become hot in a vehicle
that has been closed up in sunny
weather; they could burn a small
child. Check the child restraint
system before you place a child
in it.
Do not leave an unsecured child
restraint system in your vehicle.
...
Driving tips
Always apply the foot or parking brake
when the vehicle is stopped in the "D" or
"R" position.
Make sure to apply the parking brake
when parking your vehicle. Do not hold
the vehicle with only the mechanical
friction of the transmission.
Do not keep the vehicle in a stationary
pos ...