SECURITY AND LOCKS > Steering Lock CM
INSPECTION
1. Check if the steering lock is released when you start the engine using the push button ignition switch.
2. If the system does not operate normally as the result of inspection, refer to “General Diagnostic Table” of the “KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)” section. General Diagnostic Table > INSPECTION">
Malfunction indicator light remains blinking
ENGINE (DIAGNOSTICS)(H4DO) > Malfunction Indicator LightMALFUNCTION INDICATOR LIGHT REMAINS BLINKINGDiagnosis:The delivery (test) mode fuse circuit is short-circuited to ground.Trouble symptom:Malfunction indicator light blinks when delivery (test) mode fuse is not connected.Wiring diagram:Engine ...
Dtc b27a5 front internal antenna open
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B27A5 FRONT INTERNAL ANTENNA OPENDTC detecting condition:When open circuit occurs in the harness between keyless access CM and front interior antenna.Trouble symptom:Keyless acc ...
Vehicle capacity weight
Vehicle placard
The load capacity of your vehicle is
determined by weight, not by available
cargo space. The maximum load you can
carry in your vehicle is shown on the
vehicle placard attached to the driver's
side door pillar. It includes the total weight
of the driver and all passeng ...