SECURITY AND LOCKS > Rear Gate Opener Button
INSPECTION
Preparation tool:
Circuit tester
1. Check the resistance between switch terminals.
Terminal No. | Inspection conditions | Standard | Connection diagram |
1 — 2 | OPEN | Less than 5 ? |
• Model without keyless access with push button start
• Model with keyless access with push button start
CLOSE
1 M? or more
2. If the inspection result is not within the standard, replace the button - opener rear gate.
Disassembly
DRIVE SHAFT SYSTEM > Front Drive ShaftDISASSEMBLY1. Place alignment marks on the shaft and outer race (PTJ).2. Remove the boot band and boot (PTJ).CAUTION:Be careful not to damage the boot.3. Remove the snap ring from outer race (PTJ).4. Remove the outer race (PTJ) from shaft assembly.5. Wipe off ...
Dtc u0155 lost communication with instrument panel cluster (ipc) control module
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0155 LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULEDetected when CAN data from meter does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > ...
Preparation tool
TELEMATICS SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, r ...