SECURITY AND LOCKS > Rear Door Latch and Door Lock Actuator Assembly
INSPECTION
1. LATCH
Check if the latch operates normally.
If the cable is faulty, replace the latch & actuator assembly - rear.
2. ACTUATOR
1. Check door lock operation
Check the door lock operation when battery voltage is applied between the terminals of actuator.
Terminal No. | Inspection conditions | Specification |
4 (+) — 1 (−) | Apply battery voltage. | LOCK |
1 (+) — 4 (−) | UNLOCK |
2. If it does not operate properly as a result of inspection, replace the latch & actuator assembly - rear.
Radio
Usually, a problem with radio reception
does not mean there is a problem with the
radio - it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and terrain
can interfere with FM reception. Power
lines or phone wires can interfere with AM
signals. And ...
Dtc p0965 pressure control solenoid "b" control circuit range/performance
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0965 PRESSURE CONTROL SOLENOID "B" CONTROL CIRCUIT RANGE/PERFORMANCEDTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine speed increases abrup ...
Control screen and audio panel
Select to display the audio source
selection screen.
Select to display the play mode
currently selected. Refer to "Select
play mode"
Select to display as a list (for the
models with AVRCP Ver. 1.4 or higher).
The track pauses when touched during
playback and plays when touched ...