SECURITY AND LOCKS > Ignition Key Lock
INSPECTION
Preparation tool:
Circuit tester
1. Check the resistance between switch terminals.
Terminal No. | Inspection conditions | Standard | |
Between all terminals | (A) | LOCK | 1 M? or more |
2 — 4 | (B) | ACC | Less than 1 ? |
1 — 2 — 4 5 — 6 | (C) | ON | Less than 1 ? |
1 — 3 — 4 5 — 6 — 7 | (D) | ST | Less than 1 ? |
2. Replace the ignition switch assembly if the inspection result is not within the standard.
Wiring diagram
LIGHTING SYSTEM > Front Fog Light SystemWIRING DIAGRAMRefer to “Front Fog Light System” in the wiring diagram.• Model without SRF: Front Fog Light System > WIRING DIAGRAM">• Model with SRF: Front Fog Light System > WIRING DIAGRAM"> ...
If you have accidentally triggered the alarm system
To stop the alarm
Do any of the following operations
Press any button on the access key/
remote transmitter.
Turn the ignition switch to the "ON"
position (models without "keyless access
with push-button start system").
Turn the push-button ignition to the
"ACC" position (models wit ...
Inspection
AIRBAG SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDTC detecting condition:Defective harness connectorTrouble symptom:Communication is impossible between the airbag control module and the Subaru Select Monitor.CAUTION:Before performing diagnos ...