Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Inspection

SECURITY AND LOCKS > Front Door Latch and Door Lock Actuator Assembly

INSPECTION

1. LATCH

Check if the latch operates normally.

If the cable or rod is faulty, replace the latch & actuator assembly - front.

2. LOCK ACTUATOR

Preparation tool:

Circuit tester

1. Check door lock operation

Check the door lock operation when battery voltage is applied between the terminals of actuator.

Terminal No.

Inspection conditions

Specification

4 (+) — 1 (−)

Apply battery voltage.

LOCK

1 (+) — 4 (−)

UNLOCK

2. Check position switch

Check the resistance between actuator terminals.

Preparation tool:

Circuit tester

Terminal No.

Inspection conditions

Standard

8 — 7

LOCK

1 M? or more

UNLOCK

Less than 1 ?

3. Replace the latch & actuator assembly - front if it is found defective.

Front door latch and door lock actuator assembly
...

Removal
SECURITY AND LOCKS > Front Door Latch and Door Lock Actuator AssemblyREMOVAL1. Raise the glass assembly - front door to the top position.2. Disconnect the ground cable from battery and wait for at ...

Other materials:

Economy history setting
1. Perform the preparation steps according to "Preparation for screen settings" 2. Operate the " " or " " switch to select the "Eco History" item. Then push the button. 3. Push the  button once more. 4. Select the time of the logged fuel consumption history by o ...

Dtc c0057 ecm control system
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0057 ECM CONTROL SYSTEMDTC detecting condition:ECM malfunctioningTrouble symptom:• VDC does not operate.• EyeSight does not operate.STEPCHECKYESNO1.CHECK COOPERATION CONTROL FEAS ...

Warning and indicator lights
Mark Name Seatbelt warning light Front passenger's seatbelt warning light SRS airbag system warning light Front passenger's frontal airbag ON indicator Front passenger's frontal airbag OFF indi ...

© 2016-2024 Copyright www.sucross.com