SEAT BELT SYSTEM > Rear Seat Belt
INSPECTION
1. VISUAL INSPECTION
Check for the following, and replace with new parts if necessary.
• Seat belt is slackened, bent or worn.
• Seat belt is abnormally wound or extended.
• Seat belt inner - rear is deformed or damaged.
• Seat belt buckle cannot be engaged properly.
2. ELR LOCK MECHANISM INSPECTION
1. Hold the retractor upright (as installed in the vehicle) and check the ELR lock mechanism.
2. Tilt the retractor from the upright posture and check the following points.
• It does not lock if the inclination angle is 15° or less.
• It remains locked if the inclination angle is 27° or more.
3. If the ELR lock mechanism does not operate properly, replace the seat belt outer - rear with a new part.
Preparation
1. Turn off the ignition switch.
2. Close all doors (including rear gate).
3. Press and hold the " "
button on the
access key. All doors (including rear gate)
will then be locked.
4. Keep the " " button
pressed, and
press the rear lock button within 5
seconds after step ...
Installation
GLASS/WINDOWS/MIRRORS > Rear Gate GlassINSTALLATIONNOTE:Use the markings on the glass to apply adhesive and primer, and to install the dam rubber - rear gate and the spacer - rear gate.(a)Marking for dam rubber - rear gate application (Ag print)(c)Marking for spacer - rear gate application (Ag pr ...
Inspection
SECURITY AND LOCKS > Rear Gate Opener ButtonINSPECTIONPreparation tool:Circuit tester1. Check the resistance between switch terminals.Terminal No.Inspection conditionsStandardConnection diagram1 — 2OPENLess than 5 ?• Model without keyless access with push button start• Model with ke ...