Subaru Crosstrek Service Manual: Inspection

Check for wear, damage or any other faults.

1. Check the universal joint assembly - steering for excessive looseness.

Service limit:

Play of the universal joint assembly - steering: 0 mm (0 in)

2. Measure the swing torque of the universal joint assembly - steering.

(1) Place the universal joint assembly - steering between wooden blocks and fix it on a vise.

(2) With the yoke (a) of gearbox side facing up, measure the swing torque in two directions.

Service limit:

Maximum load: 3.8 N (0.39 kgf, 0.86 lbf) or less

(3) With the yoke (b) of column assembly - steering side facing up, measure the swing torque in two directions.

Service limit:

Maximum load: 7.3 N (0.74 kgf, 1.64 lbf) or less

(4) Replace as necessary, if it is found defective.

Universal joint

Removal

Other materials:

Removal
BRAKE > Rear Disc Brake AssemblyREMOVALCAUTION:Do not allow brake fluid to come in contact with the painted surface of the vehicle body. If it does, wash off with water and wipe away completely.1. Lift up the vehicle, and then remove the rear wheels.2. Remove the caliper body assembly from the su ...

Auto light sensor sensitivity setting
1. Perform the preparation steps according to "Preparation for car settings" 2. Operate the " " or " " switch to select the "Auto Light Sensor" item. Then push the   button. 3. The current setting will be displayed. Push the button to enter the selection mode. 4. Selec ...

Dtc c2124 transmitter 4 no data
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2124 TRANSMITTER 4 NO DATADTC DETECTING CONDITION:Detected when no data is received from each transmitter for 8 minutes or more at a vehicle speed of 40 km/h (25 MPH) or more. (Timer is not ...