Subaru Crosstrek Service Manual: Inspection
PARKING BRAKE > Parking Brake Lever
INSPECTION
1. LEVER ASSY
1. Operate the lever assembly - hand brake 3 to 4 times and fully return the lever assembly - hand brake.
2. While slowly pulling up the lever assembly - hand brake, count the notches.
Lever stroke:
7 to 8 notches when pulled with a force of 200 N (20.4 kgf, 45 lbf)
If it is not within the specified value, adjust the parking brake. Parking Brake Assembly (Rear Disc Brake) > ADJUSTMENT">
2. SWITCH ASSEMBLY
1. Measure the resistance between the switch assembly - hand brake and chassis ground.
Preparation tool:
Circuit tester
Switch position | Standard | |
A | When shaft is free (ON) | Less than 1 ? |
B | When shaft is pressed in (OFF) | 10 k? or more |
If it is not within the specified value, replace the switch assembly - hand brake.
Installation
PARKING BRAKE > Parking Brake LeverINSTALLATION1. Install each part in the reverse order of removal.CAUTION:• The front seat mounting bolts differ between the front mounting points and the re ...
Other materials:
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission HarnessINSTALLATION1. INHIBITOR HARNESSInstall in the reverse order of removal.NOTE:Install the transmission ground terminal in the direction within the range of approx. 30° (A).Tightening torque:T1: 7 N·m (0.7 kgf-m, 3.7 ...
Operation
TELEMATICS SYSTEM (DIAGNOSTICS) > System Operation Check ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» displa ...
Note
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof Control SystemNOTEFor operation procedures of each component of the sunroof control system, refer to the respective section.• Glass lid: Glass Lid">• Sunroof assembly: Sunroof Assembly">• Sunroof motor: Sunroof ...
