PERIODIC MAINTENANCE SERVICES > Parking Brake
INSPECTION
Refer to “PB” section for parking brake inspection. Parking Brake Assembly (Rear Disc Brake) > INSPECTION">
Bulkhead wiring harness (in engine compartment) Location
WIRING SYSTEM > Bulkhead Wiring Harness (In Engine Compartment)LOCATIONConnectorConnecting toNo.PoleColorAreaNo.DescriptionB35BlackB-2 Mass air flow and intake air temperature sensorB62Light grayC-3 Front ABS wheel speed sensor RHB85Light grayB-5 Front wiper motorB104Light grayC-4 Pressure switch ...
Parking brake
To set the parking brake, depress the
brake pedal firmly and hold it down until
the parking brake lever is fully pulled up.
To release the parking brake, pull the lever
up slightly, press the release button, then
lower the lever while keeping the button
pressed.
When the parking brake i ...
Adjustment
PARKING BRAKE > Parking Brake Assembly (Rear Disc Brake)ADJUSTMENT1. SHOE CLEARANCE1. Return the lever assembly - hand brake completely.2. Loosen the adjusting nut, and make the cable free.3. Remove the adjusting hole cover (A) from the rear disc rotor.4. Insert a flat tip screwdriver (b) into th ...