MECHANICAL(H4DO) > Crank Pulley
INSPECTION
1. Check that the crank pulley has no deformation, cracks or other damages.
2. Inspect for oil leakage from the front oil seal. If there is an oil leak, replace the front oil seal with a new one. Crank Pulley > REMOVAL">
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Shifter Fork and RodINSPECTION1. Check the shifter fork and fork rod for damage. Replace if it is damaged.2. Gearshift mechanismRepair or replace the gearshift mechanism if excessively worn, bent or defective in any way.3. Inspect the clearance between ...
Disassembly
COOLING(H4DO) > Radiator Main Fan and Fan MotorDISASSEMBLY1. Remove the clip which holds the main fan motor connector onto the radiator main fan shroud.2. Disconnect the radiator main fan from the main fan motor.3. Disconnect the main fan motor from the radiator main fan shroud. ...
Two separate circuits
Your vehicle has two separate circuit
brake systems. Each circuit works diagonally
across the vehicle. If one circuit of
the brake system should fail, the other half
of the system still works. If one circuit fails,
the brake pedal will go down much closer
to the floor than usual and you will n ...