MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center Differential
INSPECTION
1. Ball bearing
Replace the bearings in the following cases.
• In case of broken or rusty bearings
• In case of worn or damaged bearings
• When the bearings fail to turn smoothly or emit noise in rotation after transmission gear oil has been applied.
• When bearing has other defects.
2. Center differential
If there is wear or damage, replace the center differential assembly.
Engine noise Inspection
MECHANICAL(H4DO) > Engine NoiseINSPECTIONType of soundConditionPossible causeRegular clicking soundSound increases as engine speed increases.• Valve mechanism is defective• Incorrect cam clearance• Worn camshaft• Broken valve spring• Defective valve shimHeavy and dul ...
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission Control Module (TCM)REMOVAL1. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.2. Remove the instrument panel lower cover. Instrument Panel Lowe ...
Welcome lighting function (if
equipped)
The welcome lighting function turns on the
low beam headlight for smooth approaching
to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
The light control switch is in the
"AUTO" position
It is dark enoug ...