Subaru Crosstrek Service Manual: Inspection
LIGHTING SYSTEM > Side Turn Signal Light Assembly
INSPECTION
1. Install the light to check if it blinks normally.
2. If it fails to blink normally, replace the light assembly - side turn mirror with a new part.
NOTE:
Since LED (Light Emitting Diode) is used for the light, replace the light assembly - side turn mirror if the LED burns out.
Removal
LIGHTING SYSTEM > Side Turn Signal Light AssemblyREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - side turn mirror. Outer Mirror Assembly > DISA ...
Other materials:
Dtc u0140 lost communication with body control module
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULEDetected when CAN data from body integrated unit is not transmitted to stereo camera.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PRO ...
Dtc p0716 input/turbine shaft speed sensor "a" circuit range/performance
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0716 INPUT/TURBINE SHAFT SPEED SENSOR "A" CIRCUIT RANGE/PERFORMANCEDTC detecting condition:Immediately at fault recognitionTrouble symptom:• No lock-up occurs.• Sho ...
Dtc b2a06 right speaker/audio circuit
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2A06 RIGHT SPEAKER/AUDIO CIRCUITDiagnosis start condition:When ACC is ON.DTC detecting condition:Speaker impedance is more than 10 k? for 100 ms. (Detached speaker connection, etc.)Trouble symptom:• ...
