LIGHTING SYSTEM > Door Switch
INSPECTION
1. Check the resistance between switch terminals.
Preparation tool:
Circuit tester
Terminal No. | Inspection conditions | Standard | Connection diagram |
1 — 3 | When door is opened | Less than 1 ? |
When door is closed
1 M? or more
2. Replace the switch assembly - door if the inspection result is not within the standard value.
Battery
WARNING
Before beginning work on or near
any battery, be sure to extinguish
all cigarettes, matches, and lighters.
Never expose a battery to an
open flame or electric sparks.
Batteries give off a gas which is
highly flammable and explosive.
For safety, in case an explosion
do ...
Dtc c2512 torque sensor sub
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2512 TORQUE SENSOR SUBNOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2511 TORQU ...
Dtc c0063 normal closing valve 1 malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0063 NORMAL CLOSING VALVE 1 MALFUNCTIONNOTE:For the diagnostic procedure, refer to “C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code ...