Subaru Crosstrek Service Manual: Inspection
LAN SYSTEM (DIAGNOSTICS) > General Description
INSPECTION
1. INSPECTION WITHOUT USING CAN DIAGNOSTIC
Before performing diagnosis, check the following items that might affect troubles of each module.
1. Check the battery. Battery > INSPECTION">
2. Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out.
3. Check the connecting condition of harness and harness connector.
2. INSPECTION USING CAN DIAGNOSTIC
Before performing diagnostics, check the following item which might affect body integrated unit malfunctions.
1. Confirm settings of body integrated unit are corresponded to vehicle equipment. Registration Body Integrated Unit > OPERATION">
2. Make sure that the User Customizing of the body integrated unit matches the vehicle equipment. User Customizing > OPERATION">
3. Confirm “Factory initial setting” of body integrated unit registrations is set to “Market”.
Preparation tool
LAN SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooti ...
Other materials:
Inspection
SECURITY AND LOCKS > Front Door Latch and Door Lock Actuator AssemblyINSPECTION1. LATCHCheck if the latch operates normally.If the cable or rod is faulty, replace the latch & actuator assembly - front.2. LOCK ACTUATORPreparation tool:Circuit tester1. Check door lock operationCheck the door lo ...
Caution
COMMUNICATION SYSTEM > General DescriptionCAUTION• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery.• When replacing the audio and MFD parts provided with memory functions, record the memory contents before disconnecting the batt ...
Interior light system Wiring diagram
WIRING SYSTEM > Interior Light SystemWIRING DIAGRAM1. WITHOUT EyeSight2. WITH EyeSight ...
