GLASS/WINDOWS/MIRRORS > Rear Regulator and Motor Assembly
INSPECTION
1. Disconnect the connector of the motor - rear.
2. Check the motor operation when battery voltage is applied between terminals of the motor - rear connector.
• LH side
Terminal No. | Inspection conditions | Standard |
4 (+) — 1 (−) | Apply battery voltage between terminals. | Increase |
1 (+) — 4 (−) | Apply battery voltage between terminals. | Decrease |
• RH side
Terminal No. | Inspection conditions | Standard |
3 (+) — 6 (−) | Apply battery voltage between terminals. | Increase |
6 (+) — 3 (−) | Apply battery voltage between terminals. | Decrease |
3. If it does not operate properly as a result of inspection, replace the regulator and motor assembly - rear.
Dtc c2421 transmitter 1 battery voltage low
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2421 TRANSMITTER 1 BATTERY VOLTAGE LOWNOTE:Refer to DTC C2424 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2424 TRANSMITTER 4 BATTERY VOLTAGE ...
Check list for interview Check
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Check List for InterviewCHECKCheck the following item about the vehicle’s state.1. STATE OF ABS WARNING LIGHTABS warning light illuminates. Always Sometimes Only once Does not illuminate• When/How long does it illuminate?Ignition key posit ...
Component
ENTERTAINMENT > General DescriptionCOMPONENT1. DATA COMMUNICATION MODULE(1)Cap screw(4)Backup batteryTightening torque: N·m (kgf-m, ft-lb)(2)Backup battery cover(5)Data communication moduleT:0.3 (0.03, 0.2)(3)Circlip ...