GLASS/WINDOWS/MIRRORS > Power Window System
INSPECTION
Symptoms | Inspection order |
All power windows do not operate. |
(1) Check the fuse.
(2) Check the power window relay.
(3) Check the wiring harness.
Particular window does not operate.
(1) Check the fuse.
(2) Check the switch - power window main.
(3) Check the switch - power window sub.
(4) Check the power window motor.
(5) Check the wiring harness.
“Window Lock” does not operate.
Check the switch - power window main.
Driver’s side window moves slightly (approx. 20 mm (0.79 in)).
(1) Check the motor - front.
(2) Check the switch - power window main.
(3) Check the wiring harness.
Driver’s side window moves slightly (approx. 50 mm (1.97 in)). (This status is not a failure.)
Perform reset operation A. Power Window System > OPERATION">
Driver’s side window does not close completely. (Using AUTO UP allows the window to fully close first and then move in reverse resulting in slightly opening.)
Perform reset operation B. Power Window System > OPERATION">
Dtc b1650 occupant detection system malfunction
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1650 OCCUPANT DETECTION SYSTEM MALFUNCTIONDiagnosis start condition:Ignition voltage is 8 V to 16 V.DTC detecting condition:• Occupant detection sensor is faulty.• Occupant detection ...
List of diagnostic trouble code (dtc) List
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LISTDTCItemContentReferenceU0073CONTROL MODULE COMMUNICATION BUS OFFDetected when CAN line abnormality is detected. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0073 CONTROL MODULE COMMUNICATION ...
Average vehicle speed
U.S.-spec. models
Except U.S.-spec. models
This display shows the average vehicle
speed since the trip meter was last reset.
Trip knob
Pressing the trip knob toggles the display
between the average vehicle speed corresponding
to the A trip meter display and
the average veh ...