FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Sub Level Sensor
INSPECTION
1. Check that the fuel sub level sensor has no damage.
2. Measure the fuel sub level sensor float position.
(1) | FULL | (2) | EMPTY | (3) | Datum points |
Float position | Standard |
FULL to Datum point (A) | 5.31±3.5 mm (0.209±0.138 in) |
EMPTY to Datum point (B) | 160.6±3.5 mm (6.32±0.138 in) |
3. Measure the resistance between fuel sub level sensor terminals.
Float position | Terminal No. | Standard |
FULL (A) | 1 and 2 | 8.7±1.0 ? |
EMPTY (B) | 270.9±4.0 ? |
Installation
EXTERIOR BODY PANELS > Front Sealing CoverINSTALLATIONCAUTION:• If the sealing cover - front door gets broken, replace it with a new part.• Apply a uniform bead of butyl tape.• Attach the sealing cover - front door, keeping it from becoming wrinkled.• Breaks in the bead wi ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Heater CoreREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Using the refrigerant recovery syste ...
Installation
BRAKE > Rear Disc Brake AssemblyINSTALLATIONNOTE:Before installation, remove mud and foreign matter from the caliper body assembly and support - rear disc brake.1. Before installation, check each part. Rear Disc Brake Assembly > INSPECTION">2. Apply a thin coat of grease to the suppor ...