FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Pump Relay
INSPECTION
1. Check that the fuel pump relay has no deformation, cracks or other damages.
2. Measure the resistance between fuel pump relay terminals.
Terminal No. | Standard |
1 and 2 | 1 M? or more |
3 and 4 | 93.8 — 136.4 ? (when 20°C (68°F)) |
3. Connect battery positive terminal to terminal No. 3 and battery ground terminal to terminal No. 4, and measure the resistance between the fuel pump relay terminals.
Terminal No. | Standard |
1 and 2 | Less than 1 ? |
Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Air Mix Door ActuatorINSTALLATIONCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">Install each part in the ...
Dtc b1831 open in curtain airbag rh squib circuit
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1831 OPEN IN CURTAIN AIRBAG RH SQUIB CIRCUITDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Curtain airbag harness (RH) circuit is open.• Curtain airbag module (RH) is faulty.&bul ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Coolant Temperature SensorREMOVAL1. Disconnect the ground cable from battery.2. Drain engine coolant. Engine Coolant > REPLACEMENT">3. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant te ...