FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Level Sensor
INSPECTION
1. Check that the fuel level sensor has no damage.
2. Measure the fuel level sensor float position.
NOTE:
When inspecting the fuel level sensor, perform the work with the sensor installed to the fuel pump.
(1) | FULL | (2) | EMPTY | (3) | Fuel tank seating surface |
Float position | Standard |
FULL to Fuel tank seating surface (A) | 133.0±4 mm (5.236±0.157 in) |
EMPTY to Fuel tank seating surface (B) | 21.6±4 mm (0.850±0.157 in) |
3. Check the resistance between fuel level sensor terminals by the connector on top of the fuel pump.
Float position | Terminal No. | Standard |
FULL (A) | 1 and 2 | 8.7±1.0 ? |
EMPTY (B) | 139.1±2.0 ? |
Roof antenna (for Rod type)
CAUTION
Be sure to remove the antenna
rod before entering garages,
parking towers and other locations
with low ceilings.
Remove the antenna rod before
washing your car at a car wash. If
the antenna rod is left attached, it
may scratch the roof.
When reinstalling the removed
ant ...
Dtc c2023 tire 3 air pressure low (normal mode)
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2023 TIRE 3 AIR PRESSURE LOW (NORMAL MODE)NOTE:Refer to DTC C2024 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2024 TIRE 4 AIR PRESSURE LOW ( ...
Dtc b16fa door sensor lh recognition error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B16FA DOOR SENSOR LH RECOGNITION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Front door impact sensor (LH) is misinstalled.• Airbag control module is faulty.CAUTION:Before ...